Email Sales
(214) 221-5544
1-800-687-2220
(214) 340-7500
Silicone Mold Release Agent (No. 40112N)
- Solvent-free dry formulation
- Food-grade for indirect food contact (†)
- Allows for faster molding & more production
- Recognized by UL
- Recommended for food-packaging molding
- Maximum operating temp: 600°F/315°C
40112N Technical Data Sheet PDF
Epoxease Mold Release Agent (No. 40614)
- No chlorinated solvents
- Non-silicone, synthetic wax-based product
- For injection molding, encapsulating, potting
- For epoxy, polyester and phenolic resins
- Maximum operating temp: 450°F/232°C
40614 Technical Data Sheet PDF
Polycarbonate Mold Release Agent (No. 41412N)
- Solvent-free dry formulation
- Paintable release, will not interfere with post-molding decorating of parts
- Specifically developed as a release for polycarbonate resin
- Recognized by UL
- Maximum operating temp: 650°F/343°C
41414
Plastic Cleaner with FOAMaction (No. 41515)
- No chlorinated solvents
- Just spray and wipe
- Ideal for cleaning plastic parts, and helps remove mold release prior to secondary operations
- Safe on all plastics; contains no ammonia
- Pleasant, fresh scent
- Water-based cleaner with low VOCs
41515 Technical Data Sheet PDF
DuraKote Mold Release Agent for Thermosets (No. 41712)
- Solvent-free dry formulation
- Semi-permanent release for urethane & epoxy molding
- Curable silicone oil (can be baked or air dried onto the mold surface)
- Paintable when baked on
- Excellent mold release for rotational molding
- Maximum operating temp: 600°F/315°C
Resin Remover Mold Cleaner Aerosol (No. 41914)
- No chlorinated solvents
- “The Stripper”
- Use to unclog mold vents
- Removes resin build-up from polyacetal, PVC, urethane and flame-retardant additives
- Removes most color deposits and stains
- Use with hot molds in machine to minimize downtime
41914 Technical Data Sheet PDF
Universal Mold Release Agent (No. 42612H)
- Solvent-free dry formulation
- Paintable, non-silicone
- Food-grade active ingredient (†††)
- Contains no lecithin
- Safe to use on most thermoplastics
- Recognized by UL
- Use where parts must be painted, hot-stamped or metalized
- Maximum operating temp: 600°F/315°C
On/Cycle Mold Cleaner (No. 44212)
- No chlorinated solvents
- Use on warm molds at the press
- NSF category P1
- Quickly removes mold release, grease and oil from mold surfaces
- Can be used to help break down resin deposits from the mold surface and clogged vents
44212 Technical Data Sheet PDF
Quick Silicone Mold Release Agent (No. 44612E)
- No chlorinated solvents
- Recognized by UL
- Food-grade for indirect food contact (†)
- Fast-drying on cold and hot molds
- Maximum operating temp: 600°F/315°C
44612E Technical Data Sheet PDF
Quick Paintable Mold Release Agent (No. 44712E)
- No chlorinated solvents
- Recognized by UL
- Paintable
- Fast-drying on cold and hot molds
- Maximum operating temp: 650°F/343°C
Quick Lecithin Mold Release Agent (No. 44812E)
- No chlorinated solvents
- Paintable, non-silicone
- Food-grade active ingredient (††††)
- Fast-drying on cold and hot molds
- Maximum operating temp: 500°F/260°C
Thermoset Mold Release Agent (No. 45414)
- No chlorinated solvents
- Made with synthetic carnauba wax
- Contains no silicones or oils
- Recommended for thermoset plastic resins
- Ideal release for injection, compression and transfer molding
- Maximum operating temp 600°F/315°C
45610
Econo-Spray® Mold Cleaner (No. 45612)
- No chlorinated solvents
- Food-grade for indirect food contact (††)
- Very low odor
- Quickly removes mold release, grease, oil and wax build-up on mold surfaces
45612 Technical Data Sheet PDF
Injection Mold Cleaner Wipes (No. 46370)
- No chlorinated solvents
- Pre-saturated cleaning towels
- Quickly removes mold release, grease or oil from mold surfaces
- Use for prepping molds for production or storage
- Mold cleaning option for clean room environments
46370 Technical Data Sheet PDF
NEXGEN Mold Cleaner (No. 46410)
- No chlorinated solvents
- NSF category P1
- Offers more cleaning strength than other “natural” mold cleaners
- Can be used to help break down resin deposits from the mold surface and clogged vents
46410 Technical Data Sheet PDF
Citra Cling Injection Mold Cleaner (No. 46515)
- No chlorinated solvents
- Citrus mold cleaner clings to surfaces for maximum performance
- Water-based high density foam
- Removes mold releases, dirt, oil and greases from mold surface
- Helps break down resin and gas deposits that clog vents
46515 Technical Data Sheet PDF
Mold Cleaner 4 (No. 46910)
- No chlorinated solvents
- NSF category P1
- Evaporates fast; leaves no residue
- Convenient method for removal of mold release, grease, oil and wax build-up on mold surfaces
- Slide’s most popular mold cleaner formulation
46910 Technical Data Sheet PDF
IPA Isopropyl Alcohol Mold Cleaner (No. 47212)
- No chlorinated solvents
- 99% isopropyl alcohol
- NSF category P1
- Evaporates fast and leaves no residue
- California VOC compliant aerosol (74.9% VOC)
47212 Technical Data Sheet PDF
Heavy-Duty 10% Mold Release Agent (No. 54912)
- Solvent-free dry formulation
- Paintable, non-silicone
- Food-grade for indirect food contact (†)
- Slide’s heaviest-duty mold release
- Maximum operating temp: 450°F/232°C
54912 Technical Data Sheet PDF
Paintable Mold Release Agent (No. 40012N)
- Solvent-free dry formulation
- Light-duty
- Recognized by UL
- Allows molded parts to be painted or decorated post-molding
- Maximum operating temp: 650°F/343°C
40012N Technical Data Sheet PDF
No-Rust Rust Preventive Spray (No. 40212M)
- No chlorinated solvents
- 5 year protection*
- Displaces moisture while sealing mold from outside condensation
- Non-silicone, non-wax formulation
- Neutralizes fingerprint acids
40212M Technical Data Sheet PDF
Tap-It Tapping Fluid (No. 404)
- No chlorinated solvents
- Produces cleaner threads
- For reaming, dressing abrasive wheels, etc.
- Made with natural oils
- Effective on tool steel, stainless, aluminum, brass, bronze, zinc and other metals
Econo-Spray® 1 Mold Release Spray (No. 40510P)
- No chlorinated solvents
- Non-paintable silicone
- Food-grade for indirect food contact (†)
- Recognized by UL
- Safe to use on most resins
- Maximum operating temp: 600°F/315°C
40510P Technical Data Sheet PDF
Econo-Spray® 2 Mold Release Spray (No. 40710P)
- No chlorinated solvents
- Paintable; permits post-decorating of molded parts without prior cleaning
- Maximum operating temp: 650°F/343°C
40710P Technical Data Sheet PDF
Econo-Spray® 3 Mold Release Spray (No. 40810P)
- No chlorinated solvents
- Non-silicone and paintable
- Food-grade active ingredient (†)
- Maximum operating temp: 600°F/315°C
40810P Technical Data Sheet PDF
Quick Injection Mold Cleaner (No. 40910P)
- No chlorinated solvents
- Cleans quickly without wiping
- Fast evaporating and leaves no residue
- Recommended for use on molds at room temperature
40910P Technical Data Sheet PDF
Zinc Stearate Mold Release Agent (No. 41012N)
- No chlorinated solvents
- Paintable, non-silicone
- Mold release powder
- Use for polycarbonate, polypropylene, polysulfone and rubber molding
- Maximum operating temp: 600°F/315°C
41012N Technical Data Sheet PDF
DFL Dry Film Lube Mold Release Agent (No. 41112N)
- No chlorinated solvents
- Formulated for deep draw molds
- Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl
- Use it on phenolic & urethane resins
- Contains PTFE
- Maximum operating temp: 500°F/260°C
41112N Technical Data Sheet PDF
EconoMIST Mold Release Spray (No. 41612N)
- Solvent-free dry formulation
- NSF category M1
- Light-duty silicone release
- Recognized by UL
- Maximum operating temp: 600°F/315°C
- Reviewed and Approved by Health Canada
41612N Technical Data Sheet PDF
Penetrant Plus (No. 41812M)
- No chlorinated solvents
- Non-silicone, PTFE-based formulation
- Choice of spray or stream aerosol pattern
- Harmless to most plastics, rubber, paint, etc.
- Displaces moisture and leaves a protective film
- Penetrating formulation helps free rusted or frozen metal components
- Meets California CARB VOC standards
41812M Technical Data Sheet PDF
SSL Mold Release Agent (No. 42112N)
- Solvent-free dry formulation
- NSF category M1
- Recognized by UL
- Low-cost heavy-duty mold release
- Maximum operating temp: 600°F/315°C
42112N Technical Data Sheet PDF
Quick RP Rust Preventive with Red Indicator Dye (No. 42810RP)
- No chlorinated solvents
- Unique “dry” formula
- 2-year protection*
- Red tracing dye helps ensure complete coverage
- Will not bleed out and mark parts
- Neutralizes fingerprint acid
- Non-silicone, non-wax formulation
- Seals out condensation
- Bulk versions of this product should be thoroughly stirred prior to use
42810RP Technical Data Sheet PDF
Mold Shield Rust Preventive Spray (No. 42910P)
- No chlorinated solvents
- Unique “dry” formula
- 2-year protection*
- Will not bleed out and mark parts
- Neutralizes fingerprint acid
- Non-silicone, non-wax formulation
- Self-cleaning in start-up
- Seals out condensation
42910P Technical Data Sheet PDF
Super Grease, Ejector Pin Grease, Non-Aerosol (No. 43900-01)
- NSF Category H1
- Ideal for mold assemblies used in the food and medical space
- NLGI #2 high temperature grease
- Contains no chlorinated solvents
- Colorless and odorless, excellent dielectric strength
- Contains PTFE, no silicones
- Will not bleed out; paintable
- Operating temps: -45°F - +650°F/-42°C - +343°C (intermittent)
Super Grease, Ejector Pin Grease, Aerosol (No.43911P)
- NSF Category H1
- Ideal for mold assemblies used in the food and medical space
- NLGI #2 high temperature grease
- Contains no chlorinated solvents
- Colorless and odorless, excellent dielectric strength
- Contains PTFE, no silicones
- Will not bleed out; paintable
- Operating temps: -45°F - +650°F/-42°C - +343°C (intermittent)
43911P Technical Data Sheet PDF
Acid Vapor Neutralizer Rust Preventive (No. 44011P)
- No chlorinated solvents
- Protects molds when using PVC and flame-retardant resins
- Provides dual protection against moisture and hydrochloric acids
- One-step rust preventive
44011P Technical Data Sheet PDF
Pure Eze Mold Release Agent (No. 45712N)
- Solvent-free dry formulation
- Food-grade active ingredient (†††)
- Recognized by UL
- Neutral white oil-based release; does not contain lecithin
- Won’t turn color or turn rancid
- Paintable, non-silicone
- Excellent all-purpose mold release for use with most resins
- Maximum operating temp: 600°F/315°C
45712N Technical Data Sheet PDF
Urethane Mold Release Agent (No. 45812H)
- Solvent-free dry formulation
- Non-paintable silicone mold release
- Maximum operating temp: 500°F/260°C
- Effective for all polyurethanes: rigid, semi-rigid and flexible urethane foams
45812H Technical Data Sheet PDF
Knock Out Mold Release Agent (No. 46612N)
- Solvent-free dry formulation
- Paintable, non-silicone
- Approved for indirect food contact (†)
- Maximum operating temp: 450°F/232°C
46612N Technical Data Sheet PDF
